CLAMP

• Adjustable individual Pressure Setting of each stage

• Position based acceleration / deceleration for accurate position Switching      and control of speeds and pressures

• Programmable Clamp position with its feedback by linear transducer

• Programmable Ejector Stroke, Pressure and Speed

• Proportional Speed Control with 5 closing and opening speed

• Quick auto Clamp forces setting

• Safety Guard suitable for Robot / Sprue picker

• Sensitive Mould Protection with try again circuit

• Stage wise Actual Time Display

• Insert Moulding

• Injection Velocity and Pressure Steps (6 Speed and 15 Pressure profile)

• Adjustable Profile to switch over from fill to pack based on Position,Time and Cavity pressure

• Aluminium Chequered Plate provided below Purge area

• Availability of auto heat startup and shutdown with timer based sprue break facility

• Choice extended for Injection decompression before / after refilling or both

• Extruder rpm adjustment on screen and actual rpm display 5 stage RPM &      back pressure control through screen

• Eyebolt provision for Barrel lifting

• Linear position Transducer assistance for real time read out and                   accurate Control

• Nozzle Contact activation force by Limit switch

• PID Control Algorithms for barrel heating zone

• Sprue break feature with timer

• User Friendly design for Cold slug removal, Semi auto purge, Intrusion moulding

•  Sequential Ejector, speed adjustable through screen

•  Ejector Stay Forward

•  Intermediate Retract set point

•  Linear Transducer provided for ejector position read out

•  Pulsating Ejector Strokes with ejector forward / retract dwell timer

•  Two-stage Ejector forward profile with soft eject

• Accurate PID Temperature Controls settable through operator panel for nozzle and barrel zones

• Actual Current Display of individual heating zone with heater failure detection

• Feed Throat Temperature Indication

• Heat standby after set number of cycles

• High/Low Temperature Alarm Bands

• Set and Actual Temperature data with bar graph

• Soak timer for Cold start protection

• Hydraulic Controlled Variable Volume Pump

• Continuous oil filtration with 10 micron filter and audiable alarm for filter clogging         

• Ergonormic hydraulic layout for easy approach

• Pre- heating circuit for hydraulic oil

• Low oil level monitoring