MOULD YOUR FUTURE - MILACRON WAY                                                          TECHNOLOGY FOR GLOBAL MARKET
 

The GREEN machine

 
 
METRIC UNITS    ELEKTRON 50  SPECIFICATIONS
INTERNATIONAL DIMENSIONS   500 - 55 500 -120 500 - 300
INJECTION UNIT SPECIFICATIONS UNITS      
A B C A B C A B C
SCREW DIAMETER mm 18 20 22 18 25 30 30 35 40
INJECTION PRESSURE MAXIMUM bar 2500 2345 1939 2444 2016 1400 2500 1943 1488
THEORETICAL DISPLACEMENT cm3 19 24 29 31 59 85 113 154 201
SCREW STROKE mm 75 75 75 120 120 120 160 160 160
INJECTION CAPACITY MAXIMUM 1) gm 16 20 25 26 51 73 97 132 173
INJECTION RATE cm3/sec 38 47 57 38 74 106 106 144 188
INJECTION CAPACITY CALCULATED  kW 11.1 11.1 11.1 14.8 14.8 14.8 28 28 28
PLASTICISING RATE 2) gm/sec 3.53) 4.53) 5.53) 3.83) 6.9 9.63) 14.53) 19.1 24.33)
SCREW L/D RATIO   22 21 19 20 20 20 22 22.9 20
SCREW SPEED MAXIMUM rpm 300 300 300 300 300 300 300 300 300
INSTALLED HEATING CAPACITY kW 4.9 4.9 4.9 4.9 6.7 7.9 9.2 11.2 11.2
NO. OF HEATING ZONES            4 4 5
NOZZLE HOLDING FORCE tons 4 4 6
UNIT STROKE mm 180 250 250
CLAMP UNIT SPECIFICATIONS        
CLAMPING  FORCE tons 50 50 50
MOULD OPENING STROKE mm 260 260 260
MOULD INSTALLATION HEIGHT MIN./MAX. mm 150 / 410 150 / 410 150 / 410
MAX. DISTANCE BETWEEN PLATENS mm 670 670 670
CLEARANCE TIE BAR MAX. (H x V) mm 320 x 320 320 x 320 320 x 320
CLAMPING PLATENS MAX. (H x V) mm 470 x 490 470 x 490 470 x 490
EJECTOR FORCE tons 3 3 3
EJECTOR STROKE mm 125 125 125
GENERAL DATA          
DRY CYCLE min -1 33 33 33
TOTAL CONNECTED POWER kW 15.9 17.7 28.2
MACHINE DIMENSIONS (L x W x H) m 3.94 x 1.224) x 1.84 3.94 x 1.224) x 1.86 4.18 x 1.224) x 1.87
         

  1)  Conversion factor 0.86 based on polystyrene.
  2)  Referring to polystyrene,  depending on material and processing conditions
  3)  Theoretical
  4)  Without IQT
  5)  All cables to be 3-1/2 core, PVC insulated, inner sheathed, armoured cables.
 

 
 
 
 
 
Quick Tour     |     Ask the Expert     Any Comments?
 Contact Webmaster

    © Ferromatik Milacron India Ltd., Ahmedabad.