• Adjustable individual pressure setting of each stage

• Position based acceleration / deceleration for accurate position switching  and control of speeds and pressures

• Programmable Clamp position with its feedback by linear transducer

• Programmable ejector stroke, pressure and speed

• Proportional speed control with 5 closing and opening speed

• Quick auto clamp force setting

• Safety guard suitable for robot / sprue picker

• Sensitive mould protection with try again circuit

• Stage wise actual time display

• Tonnage indication on screen

• Closed loop control of injection velocity and pressure steps (6 Speed and 15 Pressure profile)

• 5 stage rpm and back pressure control through screen

• Adjustable profile to switch over from fill to pack based on position / time / hydraulic pressure

• Aluminium chequered plate provided below purge area

• Availability of auto heat startup and shutdown with timer based sprue break facility

• Choice extended for Injection decompression before / after refilling or both

• Extruder rpm adjustment on screen and actual rpm display

• Eyebolt provision for barrel lifting

• Linear position transducer assistance for real time readout and accurate control

• Nozzle contact activation force by pressure switch

• PID control algorithms for barrel heating zone

• Sprue break feature with timer

• User friendly design for cold slug removal, semi auto purge, intrusion moulding

     EJECTOR

•  Ejector on fly, speed adjustable through screen (Eject parallel to mould open / close)

•  Ejector stay forward

•  Intermediate retract set point

•  Linear transducer provided for ejector position read out

•  Pulsating ejector strokes with ejector forward / retract dwell timer

•  Two stage ejector forward profile with soft eject

• Accurate PID temperature controls settable through operator panel for nozzle and barrel zones

•  Actual current display of individual heating zone with heater failure detection

•  Feed throat temperature indication

•  Heat standby after set number of cycles

•  High / low temperature alarm bands

•  Set and actual temperature data with bar graph

•  Soak timer for cold start protection

•  PID oil temperature control

• Electro Hydraulic Controlled Variable Volume Pump

• Continuous oil filtration with 10 micron filter and audiable alarm for filter clogging

• Ergonomic hydraulic layout for easy approach

• Pre-heating circuit for hydraulic oil

• Low oil level audible alarms