MOULD YOUR FUTURE - MILACRON WAY                                                          TECHNOLOGY FOR GLOBAL MARKET














MAGNA T 150 SPECIFICATIONS		  

 
MAGNA T 150 SPECIFICATIONS
INTERNATIONAL SIZE 1500-450 1500-630 1500-970
INJECTION UNIT UNIT 450 630 970
    A' A B A' A B A' A B
SCREW DIAMETER mm 35 40 45 40 45 50 45 50 60
INJECTION CAPACITY MAX. (GPPS) gms 165 215 272 239 302 373 363 448 645
THEORETICAL DISPLACEMENT cc 173 226 286 251 318 393 382 471 679
INJECTION PRESSURE bar 2441 1979 1565 2492 1969 1595 2248 2057 1428
INJECTION RATE cc/sec 113 147 187 118 149 184 116 143 206
INJECTION SCREW STROKE mm 180 180 180 200 200 200 240 240 240
SCREW L/D RATIO   25.7 22.5 20 25 22.2 20 26.7 24 20
SCREW SPEED rpm 400 400 400 320 320 320 201 201 201
PLASTICIZING RATE (GPPS) gm/sec 19 27.5 37.5 22 30 41 19 26 42
TOTAL HEAT CAPACITY KW 10.6 12.6 12.6 13.6 16.9 16.9 16 19.3 19.3
CLAMP UNIT    
CLAMP FORCE tons 1500
CLAMP STROKE mm 440
MAXIMUM DAYIGHT mm 950
MINIMUM MOULD HEIGHT mm 150
MAXIMUM MOULD HEIGHT mm 510
PLATEN SIZE (H X V) mm 740 X 740
DISTANCE BETWEEN TIE ROD mm 510 X 510
TIE ROD DIAMETER mm 85
EJECTOR STROKE mm 130
EJECTOR FORCE tons 4.4
GENERAL    
ELECTRIC MOTOR kW (HP) 18.5 (25)
MACHINE DIMENSION (L X W X H) m 5.4 X 1.5 X 2.5

 

Specifications are subject to change without prior notice.
* All cables should be 3.1/2 core PVC insulated inner Sheathed, Armoured

 
 
 
 
 
Quick Tour     |     Ask the Expert     Any Comments?
 Contact Webmaster

    © Ferromatik Milacron India Ltd., Ahmedabad.