MOULD YOUR FUTURE - MILACRON WAY                                                          TECHNOLOGY FOR GLOBAL MARKET














MAGNA T 350 SPECIFICATIONS		  

 
MAGNA T 350 SPECIFICATIONS
INTERNATIONAL SIZE 3500-970 3500-1540 3500-2290
INJECTION UNIT UNIT 970 1540 2290
    A' A B A' A B A' A B
SCREW DIAMETER mm 45 50 60 50 60 70 60 70 80
INJECTION CAPACITY MAX. (GPPS) gms 363 448 645 522 752 1024 860 1170 1528
THEORETICAL DISPLACEMENT cc 382 471 679 550 792 1078 905 1232 1608
INJECTION PRESSURE bar 2248 2057 1428 2234 1941 1426 2234 1856 1421
INJECTION RATE cc/sec 214 265 382 195 280 382 216 294 384
INJECTION SCREW STROKE mm 240 240 240 280 280 280 320 320 320
SCREW L/D RATIO   26.7 24 20 28 23.3 20 26.7 22.9 20
SCREW SPEED rpm 374 374 315 234 234 234 152 152 152
PLASTICIZING RATE (GPPS) gm/sec 35 48 66 30 49 70 32 46 63
TOTAL HEAT CAPACITY KW 16 19.3 19.3 20.1 22.2 22.2 28 30 30
CLAMP UNIT    
CLAMP FORCE tons 3500
CLAMP STROKE mm 675
MAXIMUM DAYIGHT mm 1475
MINIMUM MOULD HEIGHT mm 300
MAXIMUM MOULD HEIGHT mm 800
PLATEN SIZE (H X V) mm 1030 X 1030
DISTANCE BETWEEN TIE ROD mm 720 X 720
TIE ROD DIAMETER mm 130
EJECTOR STROKE mm 200
EJECTOR FORCE tons 7.0
GENERAL    
ELECTRIC MOTOR kW (HP) 37.5 (50)
MACHINE DIMENSION (L X W X H) m 8.2 x 2.1 x 3.1

 

Specifications are subject to change without prior notice.
* All cables should be 3.1/2 core PVC insulated inner Sheathed, Armoured

 
 
 
 
 
Quick Tour     |     Ask the Expert     Any Comments?
 Contact Webmaster

    © Ferromatik Milacron India Ltd., Ahmedabad.