OMEGA 660 W SPECIFICATIONS
INTERNATIONAL DIMENSIONS		6600 - 4850			6600 - 6440			6600 - 10065
INJECTION UNIT SPECS	UNITS	90 MM			100 MM			110 MM
		A	B	C	A	B	C	A	B
SCREW DIAMETER	mm	90	100	110	100	110	125	110	125
INJ.CAPACITY MAX ( G.P.STRYENE )	g	2421	2990	3618	3289	3979	5139	5087	6570
THEORETICAL DISPLACEMENT	cc	2545	3142	3802	3457	4183	5401	5347	6905
INJ.PRESSURE MAX.	bar	1906	1544	1276	1864	1540	1193	1891	1465
INJ. RATE
75 HP PACKAGE	cc/sec	448	554	670	484	586	756	410	530
100 HP PACKAGE	cc/sec	618	764	924	668	808	1044	567	732
150 HP PACKAGE	cc/sec	874	1079	1306	944	1142	1475	801	1034
PLASTICIZING RATE (GPPS)
75 HP PACKAGE	gm/sec	63	84	102	65	82	117	82	117
100 HP PACKAGE	gm/sec	87	112	141	90	113	162	113	162
150 HP PACKAGE	gm/sec	123	158	200	127	160	229	160	229
INJ. SCREW STROKE	mm	400	400	400	440	440	440	560	560
SCREW L / D RATIO		22.2	20	18.2	22	20	17.6	22.7	20
SCREW SPEED
75 HP PACKAGE	rpm	110	110	110	88	88	88	88	88
100 HP PACKAGE	rpm	150	150	150	120	120	120	120	120
150 HP PACKAGE	rpm	212	212	212	170	170	170	170	170
TOTAL HEAT CAPACITY	Kw	54	54	54	59.3	59.3	59.3	62	62
CLAMP UNIT SPECIFICATIONS	UNITS
CLAMP FORCE	tons	660
CLAMP STROKE	mm	1320
MAX. DAYLIGHT	mm	1780
MOLD HT. MIN	mm	460
PLATEN SIZE	mm	1400x1400
DISTANCE BET. TIE RODS ( HxV )	mm	950x950
TIE ROD DIAMETER	mm	170
EJECTOR STROKE MAX.