MOULD YOUR FUTURE - MILACRON WAY                                                          TECHNOLOGY FOR GLOBAL MARKET












Shuttle Series
Extrusion Blow Moulding Machines
TECHNICAL FEATURES

Technical Specifications

UMS 40
 
Model

Unit

UMS 40
Station  

Single

Double
Standard Extruders mm 50 -60 -70
MOULD AND PLATEN DIMENSIONS
Mould width - Max. 1                    (A) mm 270
Mould height - Max. 2                (B) mm 270
Half mould thickness - Min.         (C) mm 80
Mould weight - Max. (each carriage) kg 70
Platen dimension                     (D x E) mm 210 x 270
Distance between platens (min./max.) (F) mm 160 x 310
CENTRE DISTANCE (CD)
2 cavity mm 110
3 cavity mm 75
4 cavity mm 55
CLAMP UNIT    
Clamp force kN 40
Horizontal shuttle stroke mm 280
Carriage dry cycle time 3 sec 1.9
Number of cycles - Max. (each carriage) no./min 14
Clamp pressure - Max. bar 130
Oil pump motor power kW 10 15
UTILITY REQUIREMENTS  
Total connected load (Min - Max) kW 43 - 49 48 - 75
Compressed air requirements @ 6 - 9 bar Nm3/hr 13 26
Hydraulic unit + Extruder cooling requirement4 kJ/hr 36000 55000
Hydraulic unit + Extruder cooling water flow m3/hr 1.4 2.1
Mould cooling requirement (HDPE)5 kJ/hr 48000 75000
Mould cooling water flow (HDPE) cond. @ 20 C m3/hr 5.7 9.0
MACHINE DIMENSION AND WEIGHT6  
Width                                          (W) m 2.7 3.2
Length                                         (L) m 4.0 4.0
Height                                          (H) m 2.7 2.7
Wight (approx) kg 4000 5500
   

SMOOTH FEEDING BARREL

 GROOVED FEEDING BARREL
EXTRUDER7   ECE50 ECE60 ECE70 ECE80 M-ECE50 M-ECE60 M-ECE70 M-ECE80
Screw diameter / L:D ratio mm 50/24 60/24 70/24 80/24 50/24 60/24 70/24 80/24
Screw speed - Max. (HDPE) rpm 116 94 101 96 116 94 101 96
Electric motor power / Motor type kW 22/AC 30/AC 40/AC 71/AC 22/AC 30/AC 45/AC 71/DC
Output - Max. (HDPE with HLMFI = 15) kg/hr 40 70 95 120 80 125 155 210
Standard output (HDPE with HLMFI = 15) kg/hr 30 45 60 80 55 85 105 145
Standard output (VHMWPE with HLMFI =2) kg/hr n.a. n.a. n.a. n.a. 55 90 110 150
Output range (PVC) kg/hr 15-40 20-50 25-65 30-80 n.a. n.a. n.a. n.a.
Heating zone number / Total heating power no./kw 5/9 5/11 5/16 5/18 5/9 5/11 5/16 5/18

* Other configurations are available on request.

  1. For single station machine, mould width and centre distance can be larger.
  2. With mould exceeding 50 mm above top face of platen.
  3. Sum of clamp and shuttle dry movement, apart from process
  4. Water temperature 250 C with 5 bar pressure.
  5. Water temperature 100 C with 5 bar pressure.
  6. Data may vary depending on machine configuration.

  7. Max. output is measured at 100% screw speed with 100% virgin resin.
    Standard output is measured at 80% screw speed with 70% virgin resin
    and master batch + 30 % regrind.

     


All specifications reflect average values based on typical machine layout. Actual figures will vary depending on final machine configuration. Performance specifications are based on theoretical data. Photograph may show attachments or accessories, which may not be part of the standard scope of supply. Due to continual improvement, specifications are subject to change without notice.


 
 
 
 
 
 
Quick Tour     |     Ask the Expert     Any Comments?
 Contact Webmaster

    © Ferromatik Milacron India Ltd., Ahmedabad.